How to stop a leaking tap at home?

Taps that constantly leak or drip can be a significant nuisance in daily living. Not only do they make an obnoxious sound, but the possibility exists that the leaking might result in a daily loss of three gallons of water. In addition, you will one day notice that your water bills are increasing and that the water you are paying for is evaporating. Fixing a leaking tap by plumbers Currumbin could cost you some money upfront, but it will save you cash in the long term. You can fix the leaking tap on your own if you have some expertise in handyman work.

 

Listed below are some of the methods of fixing a leaking tap

 

Turn Off the water supply

Turning off the main water supply is one of the most essential steps in repairing a leaky tap. If you do not turn off the water supply, there is a possibility that you will flood the bathroom. Find the fixture shutdown valves that are located below the sink. Turn the valves' handles counterclockwise to turn off the water supply. You'll need to switch off the main water supply for the house if the tap you're using doesn't have any shutoff valves. You can turn on the tap to verify whether or not the water supply is active. You have completed your fixing leaking tap task if no water comes out.

 

Disassemble the Handles of the leaking tap

To remove the handles from a leaking tap, you need to open the fixture carefully, or you can hire plumbers Currumbin for this task. You may expose the handle screws on typical fixtures by using a screwdriver with a flathead tip to remove the caps on top of the handle. Unscrew these, then pull the handles off in the other direction.

 

Remove the stem from the valve

When the handle of the tap is removed, you can view the valve stem located inside the tap. This must also be eliminated from the equation. Compression taps have a brass valve stem with a screw that may be turned to open and close the valve. Cartridge taps can be removed by simply pulling them outward. If you have problems, check the instruction manual of tap or contact professional plumbers Currumbin. 

 

Examine each part of the dripping tap

After removing all the components, thoroughly examine each part of the leaking tap to determine which ones need to be replaced. Rubber washers, O-rings, and seals should be checked properly. It is essential to replace any part of the leaking tap that are too old, too worn, or too damaged. You can find the part at your nearby store and replace it easily. This is the quickest and most effortless approach to receiving the correct replacements for your leaking tap.

 

If you cannot repair the leak in your tap, you may contact the experienced plumbers Currumbin at WPH Plumbing. We at WPH Plumbing offer 24-hour plumbing emergency services and will attend to the problem as soon as possible. When we have determined the cause of the issue, we will inform you about the parts of the leaking tap that need to be replaced to rectify the situation. We know that the level of importance to the client remains the same regardless of the size of the work, and we at WPH Plumbing work hard to solve your issues as quickly and effectively as possible.